GT 22 C Tangram module IP to 8x FM
Category : Tangram
The GT 22 C module is part of the Tangram product portfolio. The GT 22 C module allows you up to 8 services in FM format to your network. Tangram is a very high density and highly flexible solution for all kinds of networks. The WISI Tangram chassis uses a fully redundant concept (n+1, 1+1).
- High quality IP to analogue FM modulation
- Up to 8 FM channels on 1 RF output
- Advanced MPEG decoding
- Outstanding signal parameters by direct digital modulation
- High density 48 FM channels in 1 RU
- RTP/ IP input streaming with FEC error correction
- RDS extraction and insertion
- For measurement / monitoring test ports of the output signal
Streaming-Input |
|
IP-Inputs | 32 pcs. |
IP-Compliance | ISO/IEC 13818 |
IP-Input bitrate | Max. 425 Mbit/s per IPTS, Max. 850 Mbit/s total |
IP-Input protocol | UDP/RTP/RTP+FEC Unicast and Multicast, IGMP v2 and v3 |
IP-TS-Input format | SPTS CBR/VBR, MPTS CBR |
IP-FEC Inputs | Yes, with GTFEC License |
IP-FEC compliance | SMPTE 2022-1, SMPTE 2022-2 |
IP-Packet format | MPEG over UDP/IP and RTP/IP |
IP-Packet size | 188 Byte |
IP-PCR restamping | Yes |
IP-Dejittering | Yes, per default 100ms, individual adjustable |
Audio and RDS processing |
|
Audio decoder | ISO 13818-3 MPEG-1 (L1/L2); MPEG-2 (L1/L2) |
Audio language | ISO 639 |
Audio format | Mono/Stereo/Joint-Stereo |
Audio level range | ±6 dB |
Audio level step size | 1 dB |
Pilot tone frequency | 19 kHz (±2 kHz) |
Pilot tone phase stability | < ±3 ° |
Pilot tone level | 6,75 kHz (±0,75 kHz) |
RDS insertion | Yes, UECP SPB490 (dynamic and static) |
RDS carrier frequency | 57 kHz (±6 Hz) |
RDS carrier level | 2,5 kHz (±0,25 kHz) |
RDS carrier phase stability | < ±10 ° |
Audio parameters |
|
38 kHz supression | ≥42 dB |
Flatness | ≤ ±0,5 dB (40 Hz...15 kHz) |
15 kHz low pass filter | >40 dB (>19 kHz) |
Total harmonic distortion | <0,2 % (75 kHz dev.) |
S/N ratio (unweighted) | >60 dB (75 kHz dev.), (weighted ITU-R BS 468,4) >60 dB (75 kHz dev.) |
L/R channel level difference | <1 dB (40 Hz...15 kHz) |
L/R phase difference | <10 dB (40 Hz...15 kHz) |
L/R separation | >43 dB (300 Hz...4 kHz) |
Preemphasis characteristics | 50 µs (±2 μs) |
RF parameters |
|
Output ports | 1 pcs. (the second RF port is not in operation) |
Channels per port | up to 8 |
Output impedance | 75 Ω |
Output frequency | 87,5...108 MHz |
Output frequency steps | 1 kHz |
Output level stability | ±1 dB |
Output level | 102 dBµV |
Output level setting | 0...30 dB (0,5 dB steps) |
Output return loss | ≥14 dB (45 MHz -1,5 dB/Okt.) |
Output spectral purity | >66 dB |
Output broadband noise | < -120 dBm/Hz |
Processing |
|
PCR correction and de-jitter | Yes |
Processing bitrate | Max. 1200 Mbps total |
Number of PIDs | Max. 2000 PIDs total |
Connectors |
|
RJ45 | 1 pcs. (for local management) |
F-socket RF- output | 4 pcs. (1x RF-Output, 1x Test-Output -20dB ± 1dB, 2x not in operation) |
General data |
|
Power consumption | max. ≤19 W |
Operating temperature range | -5°C...+45°C, 23°F...113°F, (ETSI EN 300 019-1-3 Class 3.1) |
Max. humidty (non condensing) | 95 % |
Electro Magnetic Compatibility (EMC) | EN 50083-2 |
Safety compliance | - |
Signalling | Multicolor LEDs (Power on - green, Error - red) |
Operation Mode | - |
Hardware revision | 1000 |
Software version | 3.1 |