VX 45 0P In-house/distribution amplifier, locally supplied
Category : Distribution amplifier Home Line
Home-Line distribution amplifier in zinc diecast housing, flap cover for easy handling, attenuators and equaliser configurable via PADs and jumper. Measuring points on the input and output. Return path amplifier on the main board, low power input and high power output. Classification: KDG 1TS140 C (4.3)
- Zinc die-cast housing
- Flap-lid for easy handling
- Configuration of attenuators and equalizers via PADs and jumpers
- Measuring points at the input and output
- Return path amplifier on the circuit board
- Low power consumption, high output level
- Classification: KDG 1TS140 C (4.3)
Down-Stream / DS |
|
Frequency range downstream | 85...1006 MHz |
Gain downstream | 38 dB |
Attenuator downstream | 0...20 dB |
Equalizer downstream | 0...20 dB |
Interstage equalizer downstream | 0/6 dB |
Output level 1 | 107 dBµV |
Noise figure downstream | ≤6,0 dB |
Upstream (US) |
|
Frequency range upstream | 5...65 MHz |
Gain upstream | 28 dB |
Attenuator upstream input | 0...20 dB |
Equalizer US | 0/3/6/9 dB |
Noise figure upstream | ≤5 dB |
Output level | 120 dBµV |
Input test point (bidirectional) | -20 dB |
Output test point (directional coupler) | -20 dB |
General data |
|
Impedance | 75 Ω |
Operating voltage | 230 V AC (± 10%, LED green) |
Power consumption | ≤6,0 W |
Operating temperature range | -20...+55 °C |
Storage temperature | -25...+75 °C |
Protection class | IP20 |
Electro Magnetic Compatibility (EMC) | EN50083-2 |
Lightning protection | 1 kV (EN60728-3: - 1,2/50 μs pulse) |
Dimensions (width x height x depth) | 163 x 90 x 50 mm |