Mini Line LR 91 W Compact node for CATV downstream reception and RF Overlay
Category : Optical Network Terminations
The LR 91 W is a compact receiver for CATV distribution networks and RF overlay. The integrated WDM filter makes it possible to decouple the xPON wavelengths in addition to the CATV. It has a high output level up to 100 dBμV in the frequency range up to 1 GHz.
- compact receiver for CATV-distribution networks and RF-Overlay
- Extremely low noise optical receiver
- High RF output level, switchable: 80 dBμV (flat) or 100 dBμV (6 dB slope) for 4% OMI
- Manual adjustment of optical level compensation for maximum flexibility
- Test port for RF output signal
- Monitoring LED and DC test port for optical input power
- High-Isolation PON pass-through port for CATV overlay in single-fiber FttX networks
Downstream |
|
Wavelength CATV | 1551 nm (±6,5 nm) |
Optical input power | -8...+1 dBm |
LED monitoring optical input level | red: low/high, green: OK |
Frequency range | 47...1006 MHz |
RF output level, sloped | 100 dBµV (CENELEC 42 channels, 6 dB slope, at CSO/CTB >60 dB) |
RF output level, flat | 80 dBµV (CENELEC 42 channels, flat, at CSO/CTB >60 dB) |
Attenuator downstream | 0...20 dB (infinitely variable) |
Frequency response | ±1 dB |
Equivalent noise input | max. 4 pA/√Hz |
Output test point | -20 dB |
PON-WDM |
|
PON wavelengths | 1260 ... 1537,5 nm & 1564,5 ... 1620 nm |
Insertion loss | <1 dB |
Isolation COM -> RF downstream | >45 dB (@ 1310 nm & 1610 nm) |
Isolation COM -> PON | >15 dB (@ 1551 ± 6.5 nm) |
Isolation PON -> RF-Downstream | >60 dB |
Connectors |
|
Optical connector PON Port | SC/APC connectors |
Optical connector | SC/APC connectors |
RF connectors | F female, 75 Ω |
General data |
|
Fiber type | Single mode fiber 9/125μm |
RF return loss | min. 16 dB |
Supply voltage | 230 V AC |
Power consumption | 6 W |
Ambient temperature | -20...+50 °C |
Dimensions (width x height x depth) | 163 x 90 x 50 mm |